Best Motorola Solutions MSC-122 exam questions and answers

The site of ITCertKing is well-known on a global scale. Because the training materials it provides to the IT industry have no-limited applicability. This is the achievement made by IT experts in ITCertKing after a long period of time. They used their knowledge and experience as well as the ever-changing IT industry to produce the material. The effect of ITCertKing's Motorola Solutions MSC-122 exam training materials is reflected particularly good by the use of the many candidates. If you participate in the IT exam, you should not hesitate to choose ITCertKing's Motorola Solutions MSC-122 exam training materials. After you use, you will know that it is really good.

I believe that a lot of people working in the IT industry hope to pass some IT certification exams to obtain the corresponding certifications. Some IT authentication certificates can help you promote to a higher job position in this fiercely competitive IT industry. Now the very popular Motorola Solutions MSC-122 authentication certificate is one of them. Although passing the Motorola Solutions certification MSC-122 exam is not so easy, there are still many ways to help you successfully pass the exam. While you can choose to spend a lot of time and energy to review the related IT knowledge, and also you can choose a effective training course. ITCertKing can provide the pertinent simulation test,which is very effective to help you pass the exam and can save your precious time and energy to achieve your dream. ITCertKing will be your best choice.

If you have decided to participate in the Motorola Solutions MSC-122 exam, ITCertKing is here. We can help you achieve your goals. We know that you need to pass your Motorola Solutions MSC-122 exam, we promise that provide high quality exam materials for you, Which can help you through Motorola Solutions MSC-122 exam.

The opportunity always belongs to a person who has the preparation. But, when opportunities arise, will you seize the opportunities successfully? At present, you are preparing for Motorola Solutions MSC-122 test. Will you seize ITCertKing to make you achievement? ITCertKing Motorola Solutions MSC-122 certification training materials will guarantee your success. With our exam preparation materials, you will save a lot of time and pass your exam effectively. If you choose ITCertKing study guide, you will find the test questions and test answers are certainly different and high-quality, which is the royal road to success. And then, the dumps will help you prepare well enough for MSC-122 exam.

Exam Code: MSC-122
Exam Name: Motorola Solutions (Deploy WLAN Solutions)
One year free update, No help, Full refund!
Total Q&A: 113 Questions and Answers
Last Update: 2014-01-01

MSC-122 Free Demo Download: http://www.itcertking.com/MSC-122_exam.html

NO.1 Which of the following statements regarding the configuration of Motorola RFS controllers is TRUE?
A. ADSP can be used to push CLI profiles to APs and controllers.
B. LANPlanner can be used to push CLI profiles to APs and controllers.
C. RFMS can be used to perform predictive site surveys using an RFS controller
D. WiNG 5 can be used to perform manual site surveys using an RFs controller
E. CLI can be used to perform both manual and predictive site surveys using an RFS controller.
Answer: A

Motorola Solutions   MSC-122 test questions   MSC-122 exam prep   MSC-122 exam prep

NO.2 You are deploying a new WLAN within the WiNG 5 architecture. Which of the following is the only
UNSUPPORTED Motorola access point/port?
A. AP-300
B. AP-650
C. AP-5131
D. AP-7131
Answer: C

Motorola Solutions   MSC-122 answers real questions   MSC-122   MSC-122   MSC-122 demo

NO.3 You are deploying a new system and are creating the RF Domain(s). Which of the following options
would you use to group the APs into the same domain?
A. By VLAN, where all APs are on the same subnet.
B. By site, which can be a location where the group of installed APs can hear each other's beacons.
C. By name, so they can be easily sorted in the tree view of the controller.
D. By deployment phase, so configurations can be accidentally pushed to newly installed APs.
Answer: A

Motorola Solutions test answers   MSC-122 answers real questions   MSC-122 braindump   MSC-122 test questions

NO.4 You are designing a WLAN that will support multiple BSS IDs. One of the characteristics you need to
take into consideration is that each BSS transmits a beacon every 100 ms. How many BSSs can be
enabled on the following Motorola access points under WiNG 5: AP7131, AP650, AP6532?
A. 2, one per radio
B. 1 per AP, it is shared between the radios to provide seamless roaming
C. 8, four per radio
D. 16, eight per radio
Answer: D

Motorola Solutions   MSC-122 demo   MSC-122 original questions   MSC-122 exam prep

NO.5 Your customer has requested that during the upcoming 802.llg to 802.11n upgrade deployment you
enable 40 MHz channels on 1, 6, and 11 of the 2.4 GHz ISM band. You respond by saying that there is not
enough spectrum to allow 40 MHz channels centered on 1, 6, and 11. How wide are standard 802.11g
(OFDM) channels?
A. 20 MHz
B. 83.5 MHz
C. 5 MHz
D. 11 MHz
E. 22 MHz
Answer: A

Motorola Solutions test answers   MSC-122   MSC-122 answers real questions   MSC-122

NO.6 If a Motorola access point induces a 50 mW RF signal onto a 3 dBi antenna, what will be the resulting
EIRP of the transmitted signal?
A. 0 dBm
B. 3 dBm
C. 20 dBm
D. 50 mW
E. 50 dBm
Answer: C

Motorola Solutions   MSC-122 exam   MSC-122 dumps   MSC-122 test answers   MSC-122 original questions

NO.7 Which of the following statements is NOT considered to be a best practice with respect to the wired
backbone serving the WLAN.?
A. When performing manual configuration of a point-to-point Ethernet link, ensure that both the speed and
the duplex mode settings on the two ports match.
B. When creating a link between Ethernet 10/100BASE-T or 10/100/1000BASE-T ports, enable (or accept
the default of) auto-negotiation on both ports.
C. When creating a link between Gigabit Ethernet fiber ports, enable (or accept the default of)
auto-negotiation.
D. When creating a link between Gigabit Ethernet fiber ports, disable auto-negotiation on both ports.
Answer: D

Motorola Solutions pdf   MSC-122 questions   MSC-122   MSC-122 answers real questions

NO.8 You have just conducted a throughput test using iPerf on a WLAN that shows a PHY signaling rate of 54
Mbps, however the average throughput rate shown in iPerf is only 23.5 Mbps. What is the most likely
explanation for this condition?
A. This throughput speed is considered nominal.
B. This throughput rate could indicate a mismatch between Wi-Fi confidentiality algorithms.
C. This throughput rate indicates excessive user activity.
D. This throughput rate indicates excessive out-of-band interference such as nearby cell phone towers.
Answer: A

Motorola Solutions demo   MSC-122 questions   MSC-122

NO.9 During a recent throughput analysis test of your 802.11g network, you discovered that performance is
poor in comparison to previous baselines. You discover that this is the result of 802.11b stations becoming
associated with your access point. What option could you implement to eliminate 802.lib clients from
attaching to your network?
A. Implement protection mechanisms
B. Make 24 mbps a required data rate
C. Implement RTS/CTS at the access point
D. Change the channel used for the network
Answer: B

Motorola Solutions   MSC-122 certification training   MSC-122 test questions

NO.10 You are performing a physical site survey of a new WiNG 5 WLAN deployment. Which of the following is
CORRECT?
A. The Signal to Noise Ratio (SNR) is a critical measurement that needs to be addressed.
B. It is acceptable that you use any RF infrastructure device (Access Point) to perform the site survey test.
C. Using default settings of a site survey application will provide an adequate site survey result.
D. Customer throughput requirements are the only criteria for which need to be surveyed.
Answer: B

Motorola Solutions   MSC-122   MSC-122   MSC-122 answers real questions

NO.11 Which of the following APs does not support adaptive mode?
A. AP7131
B. AP6532
C. AP650
D. AP6521
Answer: A

Motorola Solutions   MSC-122   MSC-122   MSC-122 original questions   MSC-122 pdf

NO.12 Your customer has requested that you configure unique VLANs for voice, normal user data with
802.1X security, guest access, and management traffic. Which of the following VLAN modes can support
this request?
A. Native Mode
B. Access Mode
C. Trunk Mode
D. Aggregation Mode
E. Encapsulation Mode
Answer: C

Motorola Solutions certification training   MSC-122   MSC-122   MSC-122 pdf   MSC-122

NO.13 Which of the following is the primary method of collision avoidance in an 802.11 CSMA/CA WLAN?
A. Backoff Timer
B. Carrier Sense
C. Contention Window
D. Enhanced Distributed Channel Access (EDCA)
E. Distributed Coordination Function Interframe Spaces (DIFS)
Answer: B

Motorola Solutions exam prep   MSC-122 questions   MSC-122 exam prep   MSC-122 questions   MSC-122 certification

NO.14 You have configured a Motorola RFS controller using WiNG 5 and have attempted to adopt a group of
APs using L2 adoption but the adoption is not successful. You have confirmed the following:
-All of the APs have an Ethernet connection to the same LAN segment as the controller -Spanning Tree
Protocol (STP) has been disabled on the APs next hop switch port -Intermediate firewalls are not blocking
EtherType 0x8783
Given this scenario, which of the following is the most likely cause of the unsuccessful AP adoption?
A. DHCP option 192 has not been defined on the DHCP server
B. A local VLAN has been configured on both the controller and the APs
C. The APs GE ports have been configured for an S02.1q-tagged native VLAN
D. The APs GE ports have been configured for an 802.1q-untagged native VLAN
Answer: C

Motorola Solutions test questions   MSC-122   MSC-122

NO.15 You have an access point that requires PoE connected to a switch with a 150 meter 10 BASE-T CAT 5
cable. During testing numerous problems with both data transmission and intermittent power occurs.
Which of the following is most likely the cause?
A. The cable should be CAT 6
B. There is a duplex mismatch
C. The cable should be 100 BASE-T
D. The cable is too long
Answer: D

Motorola Solutions   MSC-122 exam   MSC-122 exam simulations

ITCertKing offer the latest 000-455 exam material and high-quality LOT-442 pdf questions & answers. Our 70-481 VCE testing engine and HP3-C33 study guide can help you pass the real exam. High-quality 74-353 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/MSC-122_exam.html